| Page Tree | ||||
|---|---|---|---|---|
|
...
| Note |
|---|
In most cases it is not recommended to use any of the following 4 functions to configure the hardware, these changes should be made via the configuration interface (link) |
gumbandSetAuthToken()
Syntax:
...
Parameters: | |
|---|---|
addr | A text string of the IP address |
static_flag | A “boolean”, set to 1 to indicate this Exhibit address should override the Exhibit address set by the Cloud server. |
gumbandSetOTAFirmware()
Temporarily puts the hardware device into “OTA firmware update mode” for local updates.
Syntax:
void gumbandSetOTAFirmware(void);
...
Gumband Status API
Functions to monitor the status of the Gumband hardware external connections.
gumbandConnected()
Syntax:
uint8_t gumbandConnected(void);
gumbandCloudConnected()
Syntax:
uint8_t gumbandCloudConnected(void);
...
gumbandExhibitConnected()
Syntax:
uint8_t gumbandExhibitConnected(void);
gumbandUSBConnected()
Syntax:
uint8_t gumbandUSBConnected(void);
...
Functions to control specific aspects of the physical Gumband hardware, support for these functions may vary depending on platform.
gumbandWriteUserData()
Syntax:
void gumbandWriteUserData(uint8_t index, uint8_t data);
gumbandReadUserData()
Syntax:
uint8_t gumbandReadUserData(uint8_t index);
...
gumbandLedSetBrightness()
Syntax:
void gumbandLedSetBrightness(uint8_t pwm);
gumbandLedOn()
Syntax:
void gumbandLedOn(void);
gumbandLedOff()
Syntax:
void gumbandLedOff(void);
gumbandLedToggle()
Syntax:
void gumbandLedToggle(void);
gumbandLedOut()
Syntax:
void gumbandLedOut(uint8_t state);
gumbandLedPWM()
Syntax:
void gumbandLedPWM(uint8_t pwm);
gumbandButtonPressed()
Syntax:
uint8_t gumbandButtonPressed(void);