const { Gumband, Sockets } = require('@deeplocal/gumband-node-sdk');

const EXHIBIT_ID = '40';
const EXHIBIT_TOKEN = 'a45ne3...';

const gb = new Gumband(
    EXHIBIT_TOKEN,
    EXHIBIT_ID,
    './manifest.json',
    {
      gbttEnabled: true, // Enable the hardware MQTT broker
      gbttPort: 1883, // (Optional) port for the MQTT broker, defaults to 1883
      noInternetConnection: true, // SDK needs to run in offline mode to use Hardware ID whitelist
      noInternetHardwareIds: [] // Array of offline hardware IDs
    }
);

gb.on(Sockets.READY, async () => {
    console.log('Gumband Ready!');
});

/*
 * Gumband Remote Button/LED Example
 * 
 * Demonstrates how to control hardware using an Exhibit Application
 *   - sets up a property to turn the on-board LED on/off.
 *   - sets up a property that updates when on-board button is pressed/released.
 */

// Create the Gumband Properties
GumbandProp button_prop = gumbandCreate("Button", "Press", gmbnd_bool);
GumbandProp led_toggle_prop = gumbandCreate("LED", "Toggle", gmbnd_bool);

// Local variable that keeps track of the button state
static bool button_currently_pressed = false;

// Define our LED/Toggle property write callback
void led_toggle_callback(uint16_t length, void* data)
{
    // Cast our received value to our intended value (we can ignore length since we are expecting one value)
    gmbnd_bool_t toggle_val = GUMBAND_BOOL(data);

    // Turn the on-board LED on or off using the toggle value
    if(toggle_val == 1) {
      gumbandLedOn();
    }
    else {
      gumbandLedOff();
    }
}

void setup()
{
  // Attach the callback to executes when something is written to the LED/Toggle property
  gumbandSetWriteCallback(led_toggle_prop, led_toggle_callback);
}

void loop()
{
  // If the on-board button is pressed
  if(gumbandButtonPressed() && button_currently_pressed == false) {
    
    // Tell the exhibit application the button has been pressed
    gumbandPublish(button_prop, true);

    button_currently_pressed = true;
  }
  else if(!gumbandButtonPressed() && button_currently_pressed == true)
  {
    // Tell the exhibit application the button has been released
    gumbandPublish(button_prop, false);

    button_currently_pressed = false;
  }
}

const { Gumband, Sockets } = require('@deeplocal/gumband-node-sdk');

const EXHIBIT_ID = '40';
const EXHIBIT_TOKEN = 'a45ne3...';

const gb = new Gumband(
    EXHIBIT_TOKEN,
    EXHIBIT_ID,
    './manifest.json',
    {
      gbttEnabled: true, // Enable the hardware MQTT broker
      //gbttPort: 1883, // Port for the MQTT broker, defaults to 1883
      //noInternetConnection: true, // SDK in offline mode
      //noInternetHardwareIds: [] // Array of offline hardware IDs
    }
);

gb.on(Sockets.READY, async () => {
    console.log('Gumband Ready!');
});

// Event when hardware comes online/connects
gb.on(Sockets.HARDWARE_ONLINE, async (payload) => {
    console.log(`Hardware with ID ${payload.hardwareId} connected.`);
});

// Event when hardware comes offline/disconnects
gb.on(Sockets.HARDWARE_OFFLINE, async (payload) => {
    console.log(`Hardware with ID ${payload.hardwareId} disconnected.`);
});

// Event when hardware sends a property
gb.on(Sockets.HARDWARE_PROPERTY_RECEIVED, async (payload) => {
  //console.log(`Hardware ID ${payload.hardwareId} sent a property`);
  //console.log(`  property: "${payload.peripheral}/${payload.property}"`);
  //console.log(`  value: ${payload.value}`);
  
  // If we receive the Button/Press property
  if(payload.peripheral === 'Button' && payload.property === 'Press') {
    // If the button is pressed
    if(payload.value == 1) {
      console.log(`Button pressed!`);
      // Set the LED/Toggle property to 1 (on)
      gb.hardware.set(`${payload.hardwareId}/LED/Toggle`, 1);
    }
    // If the button is not pressed
    else {
      console.log(`Button released!`);
      // Set the LED/Toggle property to 0 (off)
      gb.hardware.set(`${payload.hardwareId}/LED/Toggle`, 0);
    }
  }
});